Search By Part Number	Straight Accessories 90° Accessories 45° Accessories Miscellaneous Accessories Support Data/ Assembly Procedures   Descriptions SE1 SE2 SE3 SE4 SE5 SE6 SE7 SE8 SE9 SE10 SE11 SE12 SE14 SE16 SE17 SE18 SE19 SE20 SE22 SE25 SE26 SE27 SE28 SE29 SE30 CLICK HERE TO VIEW A LARGER IMAGE EXAMPLE BASIC PART NUMBER click here for SERIES CODE INFORMATION
NOTES: Identified Per MIL-STD-130 Plating Index for Finishes Available Material; Adapter Components; Aluminum Alloy Per QQ-A-225 or QQ-A-591. O-Ring, Standard Neoprene Per MIL-R-3065 or Silicone (See Note 4) Per ZZ-R-765. Wire rope; stainless steel. (nylon covered). Chain and attachment; stainless steel. Length to be specified by customer, 1.5 inch min. for parts with molding ports, .5 inch increments. Insert letter 'C' in part number for dust cap attachment (band, nut and screw) (omit if not required) Insert letter 'S' in part number for silicone O'ring(s) (omit for standard neoprene) Part to be engraved 'ARM' with no.6 plating only. (anodize red, see plating index) Part to be engraved 'SAFE' with no.7 plating only. (anodize green, see plating index) Insert the following letter and chain attachment length required (1.0 inch increments) (i.e. W6 = Wire rope 6.0 inches long) 'W' = Wire Rope 'C' = Link Chain or insert leter 'P' in part number if potting port and plug are required (omit if not required). Insert the following number for optional hole dia; 3 = .125 Dia (no.4 screw) 4 = .188 Dia. (no.8 screw) 6 = .203 Dia. (no.10 screw) DIMENSIONS ARE IN INCHES Tolerance, unless otherwise specified: .X ± .03 (1.5) .XX ± .010 (0.8) .XXX ± .005 (0.4) Angles: ± 5 degrees Fractions ± 1/32