CLICK HERE TO VIEW A LARGER IMAGE
EXAMPLE BASIC PART NUMBER
click here for SERIES CODE INFORMATION
| ORDER NUMBER | C MAX DIA | D MAX DIM | E MAX DIM | F MAX DIM | CABLE ENTRY | |
| MAX | MIN | |||||
| 01 - 03, 64 | .938 | 1.000 | .828 | .808 | .190 | .090 |
| 04 | .938 | .796 | .762 | .808 | .204 | .125 |
| 06, 51, 52, 65 | 1.062 | 1.035 | .844 | .867 | .320 | .230 |
| 05 | 1.062 | 1.340 | .844 | .867 | .286 | .188 |
| 07, 09, 53, 67 | 1.188 | 1.071 | 1.062 | .926 | .390 | .270 |
| 08, 10, 11, 54 | 1.188 | 1.637 | 1.125 | .926 | .416 | .291 |
| 12, 55, 56, 69 | 1.312 | 1.131 | 1.156 | .992 | .420 | .320 |
| 13 | 1.312 | 1.682 | 1.219 | 1.056 | .476 | .351 |
| 15, 57, 58, 70 | 1.438 | 1.281 | 1.329 | 1.056 | .540 | .460 |
| 14, 16 | 1.438 | 1.658 | 1.406 | 1.056 | .625 | .501 |
| 18, 59, 71 | 1.656 | 1.469 | 1.461 | 1.233 | .706 | .518 |
| 17, 19 - 22, 60, 72 | 1.688 | 1.783 | 1.562 | 1.296 | .837 | .581 |
| 23 - 25, 61, 74 | 1.750 | 1.838 | 1.663 | 1.358 | .956 | .644 |
| 26 - 28, 49, 62, 77 | 1.938 | 1.911 | 1.812 | 1.420 | 1.081 | .706 |
| 29 - 33, 50, 63 | 2.312 | 2.052 | 2.031 | 1.634 | 1.188 | .750 |
| 32 - 34 | 2.500 | 2.084 | 2.396 | 1.859 | 1.250 | .875 |
| 35 - 39 | 2.750 | 2.146 | 2.507 | 1.984 | 1.375 | .938 |
| 40 - 42 | 2.719 | 2.323 | 2.576 | 2.109 | 1.500 | .938 |
| 43 - 44 | 2.969 | 2.469 | 2.875 | 2.358 | 1.750 | 1.188 |
| 45, 46, 48 | 3.219 | 2.594 | 3.354 | 2.483 | 1.875 | 1.312 |
| SERIES CODE | G MAX DIM |
| A | .562 |
| B | 1.188 |
| C | .485 |
| D | .281 |
| E | .230 |
| F | .281 |
| FM | .281 |
| G | .218 |
| H | 1.000 |
| J | .281 |
| K | .500 |
| KA | .250 |
| KB | .281 |
| KC | .250 |
| KD | .375 |
| L | .500 |
| M | .500 |
| N | .250 |
| P | .25 |
| R | .656 |
| T | .438 |
| W | .344 |
| X | .312 |
| U | N / A |
- NOTES:
- Identified Per MIL-STD-130
- Plating Index for Finishes Available
- Material; Adapter Components; Aluminum Alloy Per QQ-A-225 or QQ-A-591.
- Assembly will not accomodate size 8, 4 & 0 wire.
- Code "U" not available in this configuration refer to M28840/2
Tolerance, unless otherwise specified:
.X ± .03 (1.5)
.XX ± .010 (0.8)
.XXX ± .005 (0.4)
Angles: ± 5 degrees
Fractions ± 1/32
