This Model 10310-34 Frostpoint/Dewpoint Indicator detects and indicates the frostpoint or dewpoint of gas sampled from a low pressure air system, from 3000 to 5000 psig.
The Indicator, called the Frostpointer(TM), is housed in a rugged, portable unit carried to the test site and connected, to the gas source by a sampling hose (supplied with the Frostpointer(TM)). To establish the frostpoint and dewpoint, the sample gas is cooled by an internal "cryostat" cooling system. The resulting frost or dew is viewed through a unique, patented optical and oblique lighting system. The corresponding frostpoint or dewpoint is then read from the digital meter on the front panel. The Frostpointer(TM) provides complete control of both volume and cool-down rate of sample gas over the chilled mirror surface.
The Frostpointer(TM) can also measure temperatures from one to three remote sources connected to terminal sets on the the front panel. Merely use the Selector Switch to choose a terminals, and read the remote temperature on the digital meter.
FEATURES
Important for U.S. Navy ships and submarines for dry air measurements.
Especially useful in metrology and industrial laboratories to establish measurement parameters.
Registered on the Qualified Product List (QPL): NSN 6685-00-919-4710.
Meets the requirements of MIL-I-24144C (SH). Shock tested per MIL-S-901. Vibration tested to MIL-STD-167.
Operating Pressure Range: Sample gas 2800 to 5000 psig.
Frostpoint / Dewpoint Range: -70°F (-56.7°C) to +50°F (10°C) at an accuracy of ± 5°F (± 2.78°c) over the temperature range.
Cooling Rate: -60°F within 5 minutes (with minimum 3000 psig sample), using a dependable "cryostat" cooling system.
Front panel digital readout with holding features.
Fundamental measurement accuracy traceable to NBS (National Bureau of Standards.)
Electrical Requirements: 115 vac, 60 Hz.
Carrying Case: Coast Gaurd apporved, Fire-proof. Dimensions (inches): 13.5H x 10.6W x 11.5D
